Process For Protective Metal Coating

One of the best ingredients or materials being utilized for protective metal coating processes is none other than nylon. Your latest nylon coating for metal protection purposes comes in liquid form. It is an easy to apply solution that provides protection for metals against a range of corrosive elements, from oil to lubricants, aircraft fuels to phosphate ester hydraulic fluids, salt spray and water. But this solution only works if users follow all application guidelines to the letter. Here then is a brief guide.

Apart from the protective force being provided by nylon coatings, it also provides its users with very good abrasion resistance, flexibility, high impact and toughness. It can do this at temperatures ranging from below seventy degrees Fahrenheit to as high as over three hundred degrees Fahrenheit. The packaged containers do, however, only have a shelf life of no more than six months. Utilizers are able to use the solutions on and off if you will, provided containers are correctly sealed to instructions.

Before any coating application can be made, all surfaces must first be carefully cleaned of all dust, grease and oils. To this end a specially formulated thinner solution has been prepared. An adhesion coating will also be applied. Before the container is opened for use, it must be shaken well. For the purposes of applying the first coating solution, versatility has been catered for. And to this end, users can apply resins by brush, dipping, draining or spraying, as appropriate to the surface being treated.

nylon coating for metal

One to two drying hours are required before making a second coating application. For those users utilizing the spray method, it is recommended that a thinner solution with 25 to 50 percent volume ratio is used. This is to curb the occurrence of cobwebbing.